• Call 01274 602367
40mm Kingspan Thermapitch Insulation TP10 2400 x 1200mm

40mm Kingspan Thermapitch Insulation TP10 2400 x 1200mm

Product Code: I163
Reward Points: 22
Price: £28.78
Ex Tax: £23.98
Price in reward points: 2398
Qty:  

2400 x 1200mm Foil faced 40mm Kingspan TP10 PIR Insulation Board

Kingspan Thermapitch TP10 insulation board is a rafter level insulation primarily used for tiled or slated pitched warm roof spaces.
 

Benefits of using PIR insulation

  • High performance rigid thermoset insulation –
    thermal conductivity 0.022 W/m.K
  • Conforms to Robust Details standards
  • Insulation of pipes and tanks is unnecessary
  • No condensation risk

 

Multi-purpose insulation boards

40mm Kingspan TP10 PIR insulation is a high performance rigid thermoset insulation which can also be used for lots of other applications such a lining walls in between battens and insulating floors; both timber and concrete. Kingspan TP10 is the sister product of Kingspan TF70 and Kingspan TW55 - same specification just referred to with different names for use in different applications.

How to cut PIR insulation

40mm foil faced insulation board is easy to cut to the required size with a normal handsaw to friction fit in between even the most awkward of spaces. When cutting and installing, ensure that any gaps are filled with an expanding urethane sealant so there are no cold spots. On thinner boards up to around 50mm, less mess is made if a sharp-bladed knife is used. As it can be quite a messy job, it is advisable to wear safety clothing, especially as dust mask at the very least!

The technical stuff!

Polyisocyanurate, or 'PIR' as it is more commonly known is one of the most thermally efficient insulants in the construction market at present. By combining polyols and isocyanurates a thermoset polymeric material is formed that is both rigid and robust and will not heat when melted. This therefore provides much higher thermal insulation values when compared to thermoplastic products such as polystyrene which would melt when heated.

Unlike many other organic products where performance is largely a function of geology, geography, processing and orientation, PIR insulation can be precisely engineered from first principles to achieve specific and repeatable performance characteristics.

During the manufacturing process, the chemical reaction of combining liquid polyol and isocynates produces a wet, tacky foam which then hardens and sets in any desired form. When producing sheets of insulation, this leads to finer tolerances and consistent thicknesses.

Is 40mm Kingspan PIR Insulation waterproof?

To a certain extent yes. The material is a 'closed cell' product which means that water absorption should be minimal. That said, it is not advisable to leave the sheets outside exposed to the elements for any long period of time. This will cause the edges to deteriorate and discolour. If it does get wet, it should be allowed to dry indoors naturally before installing.

 

PDF technical data sheet

For full details of delivery charges, returns, colour variations, and discounts please see our delivery & returns policy.

Write a review

Your Name:


Your Review:
Rating: Bad           Good

Enter the code in the box below:



Related Items

40mm Celotex TB4040 PIR Insulation Board 2400 x 1200mm

40mm Celotex TB4040 PIR Insulation Board 2400 x 1200mm

£18.69 (EX. VAT) | £22.43 (INC. VAT)

50mm Kingspan Thermapitch Insulation TP10 2400 x 1200mm

50mm Kingspan Thermapitch Insulation TP10 2400 x 1200mm

£24.70 (EX. VAT) | £29.64 (INC. VAT)

40mm Kingspan TF70 Thermafloor Insulation 2400 x 1200mm

40mm Kingspan TF70 Thermafloor Insulation 2400 x 1200mm

£23.98 (EX. VAT) | £28.78 (INC. VAT)