IG L1/S 100 Cavity Wall Lintel

**Large discounts available for larger full project orders, please contact us for details**

IG L1/S 100 Cavity Wall Lintel - Standard Duty Loading. Used for cavity widths in walls up to 320mm wide.

L1 lintels have a ‘top hat’ profile and are made from high quality galvanised steel. They benefit from a fully insulated centre section which satisfies the thermal bridging requirements for all UK Building Control offices.

Standard Duty IG Lintels also benefit from having a non-continuous thermal break plate. Basically, the inner leaf is warmer as it has no contact with the cold outside leaf.

Lintel installation & suitable applications

These lintels will suit:

Inner Leaf: 100 - 115mm

Cavity: 90 - 105mm

Outer Leaf: 100 - 105mm

Blockwork built tight against inner face of the lintel. Place mortar bed on top of blockwork before floor units are laid to provide even distribution of load. Lintels may be propped to facilitate speed of construction.

Please click on the load table under the main product image for the safe working loadings (SWL) for each length. Also take care to make sure that the lintel selected has a minimum of 150mm bearing at either side of the opening for lintel lengths up to 4000mm; anything above this should have a minimum 200mm bearing.

Alternative lintels

Have you have a different lintels specified on your plans? L1/S 100 lintels are IG’s equivalent to the following lintel references:

Keystone S/K 90

Catnic CG90/100

Birtley CB90

If unsure regarding compatibility, we can provide direct comparisons and advise on the SWL of each lintel type. Please contact us for details

Technical & design

For full technical details and lintel manuals see the IG website.